IDE to Two-Way Adapter Conversion Card and Old Optical Drive Hard Disk Serial Port to Parallel Port to Extended Card(Red Board)

Laptop Network AdaptersName: to ide two-way adapterCentral IC:JM20330Accessories: interconversion card x1,7PIN data cable x1,ide power cable x1System Support: Windows1. Shut down the computer before 2. Open the computer case and plug adapter card into the ide interface of the motherboard3. Connect end of the data cable to the adapter card interface and the other end to the hard disk interface,4. Set the switch and according to the adapter card label instructions5. Connect the equipped adapter card power cord (note that the direction cannot be reversed). Plug in the power cord of the hard disk at the same timeAfter connecting, the computer is turned on, and the computer can correctly identify the connected Device for normal use.Precautions!!1. When transferring ide hard disk to motherboard, you need to set the of hard disk to disc2. Adapter card need external power supply to use normally3. Turn off the computer when connecting to adapter cardModel Number : YMAType : Cable AdapterChip : jm20330Type of wire core : Copper coreInterface : other/otherNo. of connectors : Single HeadPacking List : Electrostatic bagType : Adapter card

• Laptop Network Adapters
• Model Number : YMA
• Type : Cable Adapter
• Chip : jm20330
• Type of wire core : Copper core
• Interface : other/other
• No. of connectors : Single Head
• Packing List : Electrostatic bag
• Type : Adapter card